SIIG Serial ATA 4-Channel RAID Przewodnik Instalacji Pobierz pdf (Strona 14)

For An Existing Installation

1. Setup the RAID array prior to driver installation and

boot up to Windows.

2. At the Add New Hardware Wizard, click Next.

3. Select Search for the best driver for your device

option then click Next.

4. Insert the driver CD, check CD-ROM drive, uncheck

the other check boxes, then click Next.

5. Click Next, then Finish.

6. Remove the driver CD and restart Windows to

complete the installation.

When Windows resumes, go to SATARaid GUI on page

22 and install the RAID monitoring utility.

Windows ME

For A New Installation

1. Setup the RAID array prior to Windows installation.

2. Follow Microsoft's Windows installation procedure.

3. Once Windows has installed, right click My

Computer and click Properties. Select Device

Manager tab.

4. Double click PCI RAID Controller listed under

Other Devices.

5. Select Driver tab and click Update Driver.

6. Insert the driver CD, select Automatic search for a

better driver (Recommended), then click Next.

7. Accept the default entry, then click OK.

8. Click Finish, remove the driver CD, then click Yes to

restart Windows to complete the installation.

When Windows resumes, go to SATARaid GUI on page

22 and install the RAID monitoring utility.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Brak uwag

SIIG Serial ATA 4-Channel RAID Przewodnik Instalacji Strona 14