SIIG Serial ATA 4-Channel RAID Przewodnik Instalacji Pobierz pdf (Strona 12)

Deleting RAID Arrays

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. Select Delete RAID Set, then press Enter.

3. Select the RAID set then press Enter.

4. When asked Are You Sure (Y/N)?, press Y to confirm.

5. The RAID set is now deleted.

Resolving Conflicts

When a RAID set is created, the metadata written to the

disk includes drive connection information. If, after a

disk failure, the replacement disk was previously partof

a RAID set (or used in another system), it may have

conflicting metadata. If so, this will prohibit the RAID set

from being either created or rebuilt, in order for the RAID

set to function properly, this old metadata must be first

overwritten with the new metadata. To resolve this, from

the main BIOS window select Resolve Conflicts, then

press Enter, the correct metadata, including the correct

drive connection information, will be written to the

replacement disk.

Low Level Format

Low Level Format is built into the RAID BIOS to make it

more convenient to erase the entire contents of a hard

disk drive, including data, drive and partition

information. The Low Level Format utility works on

single hard drives only, before the RAID set is configured.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Brak uwag

SIIG Serial ATA 4-Channel RAID Przewodnik Instalacji Strona 12