SIIG Serial ATA 4-Channel RAID Przewodnik Instalacji Pobierz pdf (Strona 10)

RAID 0+1 (Mirror+Striping)

This RAID set is used on New/Blank hard drives, do not

use existing hard drive(s) with data. To create a Mirrored-

Striped set four hard drives are required.

For Manual Configuration

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

2. At the next screen select Create RAID Set, then

press Enter.

3. Select RAID10 then press Enter.

4. Select Manual configuration, then press Enter.

5. Select chunk size from 4k, 8k, 16k, 32k, 64k or 128k,

then press Enter.

6. Select the first drive, press Enter.

7. Select the second drive, press Enter.

8. Select the third drive, then press Enter.

9. Select the fourth drive, then press Enter.

10. Select Create without data copy then press Enter.

11. When asked Are You Sure (Y/N)?, press Y to accept.

12. Press Ctrl+E to exit the BIOS.

13. When asked Are you sure to exit (Y/N)?, press Y to

exit.

14. Continue with Fdisk and Format steps as if you

were installing a conventional hard drive.

For Auto Configuration

The default chunk size is 64k when selecting Auto

configuration.

1. As the BIOS boots press Ctrl+S or F4 when prompted

to enter the RAID BIOS.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Brak uwag

SIIG Serial ATA 4-Channel RAID Przewodnik Instalacji Strona 10