SIIG Serial ATA 4-Channel RAID Przewodnik Instalacji Pobierz pdf (Strona 17)

12. Follow on-screen instructions to complete setup for

your NT version.

When Windows installation completes, go to SATARaid

GUI on page 22 and install the RAID monitoring utility.

For An Existing Installation

1. Setup the RAID array prior to driver installation and

boot up to Windows NT.

2. Double click My Computer/Control Panel/SCSI

Adapters, then click on the Drivers tab.

3. Select Add… then Have Disk....

4. Insert the driver CD, type in D:, then click OK.

(Change D: to match your CD-ROM drive)

5. Highlight Silicon Image Sil 3x14 SATARaid

Controller and click OK.

6. Click OK, close all open Windows, then restart NT

to complete the installation.

When Windows resumes, go to SATARaid GUI on page

22 and install the RAID monitoring utility.

To Verify Installation In Windows NT 4.0:

1. Go to My Computer/Control Panel/SCSI Adapters.

2. Highlight Silicon Image Sil 3x14 SATARaid

Controller from SCSI Adapters listing and select

Properties. A message This device is working properly

is displayed in the dialog box, the driver has been

correctly installed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Brak uwag

SIIG Serial ATA 4-Channel RAID Przewodnik Instalacji Strona 17