SIIG Serial ATA PCI RAID Instrukcja Użytkownika Pobierz pdf (Strona 24)

RAID

2-13

2-4 Deleting RAID Arrays

1. As the BIOS boots press F3 when prompted to enter the

UltraATA 100 RAID BIOS utility.

2. Press F1 to dissolve a RAID set.

3. Enter the number of the RAID set to be deleted.

4. Answer Y to remove the RAID set.

5. Press ESC when finished to reboot.

2-5 Using RAID Auto Setup

Each RAID array setup option comes with an Auto configuration

feature. Use Auto Setup option with new or blank hard drives.

2-5.1 RAID 0 (Striping)

1. At boot press F3 when prompted to enter the RAID

BIOS utility.

2. Press F2 to create a RAID set.

3. Press F1 to create a Stripe set.

4. Press A for Auto Setup.

5. Enter the total number of drives in the stripe set.

6. Press Y to accept the configuration.

7. Configure another RAID set or press ESC to reboot.

2-5.2 RAID 1 (Mirroring)

1. At boot press F3 when prompted to enter the RAID

BIOS utility.

2. Press F2 to create a RAID set.

3. Press F2 to create a Mirror set.

4. Press Y to use Auto setup.

5. Press Y to accept the configuration.

6. Configure another RAID set or press ESC to reboot.

2-5.3 RAID 0+1 (Mirror-striping)

1. At boot press F3 when prompted to enter the RAID

BIOS utility.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 53 54

Brak uwag

SIIG Serial ATA PCI RAID Instrukcja Użytkownika Strona 24