SIIG UltraATA 133 PCI Przewodnik Instalacji Pobierz pdf (Strona 7)

RAID 1 (Mirror)

For Manual Setup

For New/Blank Hard Drives

1. As the BIOS boots press F3 when prompted to enter

the RAID BIOS.

2. At the next screen press F2 to form a RAID set.

3. Press F2 to create RAID 1. In a Mirror set the source

drive needs to be equal to or smaller than the

destination drive. For optimal performance the

source drive and destination drive should be on

separate IDE channels.

4. Answer N to Auto Setup.

5. Assign Source drive, then assign Destination drive.

6. Answer N when asked to Copy from Source to

Destination.

7. Answer Y to Enable Auto-Rebuild.

8. When asked Are you Sure?, press Y to accept .

9. Press ESC to exit the RAID BIOS and boot the

computer.

10. Continue with Fdisk and Format steps as if you

were installing a conventional hard drive.

For Existing Hard Drives with Data

1. As the BIOS boots press F3 when prompted to enter

the RAID BIOS.

2. Press F2 to enter the RAID setup screen.

3. Press F2 to form Raid set 1 (mirror).

4. Answer N to Automatic setup.

5. Assign Source drive, then assign Destination drive.

6. Press Y to copy from Source to Destination drive.

7. Press N to Offline copy.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Brak uwag

SIIG UltraATA 133 PCI Przewodnik Instalacji Strona 7