SIIG PCI-1S+DOS Instrukcja Użytkownika Pobierz pdf (Strona 9)

4. Edit the startup file and add this command line at

end of the startup file.

- setserial /dev/ttyS2 port 0xa000 irq 9 uart 16950.

Note: ttyS value, I/O port address and irq should

be different from one system to another. These

values should be based on the results you get from

steps 2 & 3.

5. Save the startup file and restart your system.

Changing COM Port Address

Some serial devices need a specific COM port in order to

work. If your serial device works properly, do not

change this setting.

Windows 95/98/98SE/ME

1. From the Device Manager window double click

Ports(COM & LPT), then double click the

CyberSerial PCI serial port you want to change.

2. Click Settings tab, click the down arrow that is next

to the Port Name box and select a COM address that

is not currently in use.

3. Click OK, then close Device Manager to save the

changes.

Windows 2000/XP/Server 2003

1. From the Device Manager window double click

Ports(COM & LPT), then double click the

CyberSerial PCI serial port you want to change.

2. Click Settings tab and click Advanced.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

SIIG PCI-1S+DOS Instrukcja Użytkownika Strona 9